Have you always liked the look of the dual gauge T-Sport?  

Another great solution from Guerrilla Cables.  This harness allows you to add a traditional speedometer and tachometer to your Street Bob FXBB/S, Softail Standard FXST, and Low Rider ST (Without RDRS/Traction Control).  This will give you full visibility of your instruments at a glance without compromising your sight of the road.

These wire harnesses are custom made for easy plug-n-play installation for a dual gauge setup but in various lengths to meet your needs.

(THIS HARNESS IS NOT COMPATIBLE ON BIKES WITH RDRS/TRACTION CONTROL, BECAUSE THE RECOMMENDED/COMPATIBLE GAUGE DOES NOT HAVE AN RDRS/TRACTION CONTROL SIGNAL.  THIS WILL CAUSE A CHECK ENGINE LIGHT ERROR BECAUSE THE SIGNAL WILL NOT BE RECEIVED.  THIS IS THE INTERNAL CIRCUITRY OF THE GAUGE, NOT THE WIRING HARNESS.)

Available in the following lengths:

19, 22, & 25 Inches

No cutting or splicing required.

ITEMS REQUIRED BUT NOT INCLUDED

1.) Speedo & Tach Gauges (2018-Later Lowrider Speedo & Tach)

       SPEEDO:

        a.) H-D Part #70900697 (U.S.A Models) or

        b.) H-D Part #70900698 (International Models -except England) or

        c.) H-D Part #70900699 (England Only)

       TACH:

        a.) H-D Part #70900729 (All Models)

2.) Speedo/Tach mounting bracket

3.) Speedo/Tach gaskets & hardware

*These harnesses are direct plug-n-play when used with appropriate gauges indicated above.

*SOFTAIL STREET BOB (FXBB) 2018-2024

*SOFTAIL STREET BOB (FXBBS) 2021-2024

*SOFTAIL STANDARD (FXST) 2020-2024

*SOFTAIL LOW RIDER ST (FXLRST) 2020-2024 (Without RDRS/Traction Control Bikes Only)